Multiladdare E4Q Li-Po Quad-laddare DC 4x50W

Multiladdare LiPO SKYRC E4Q Quad 4x50W

Med denna laddare kan du ladda 4 st batterier individuellt, vilket gör att du snabbare kan komma ut och köra igen.

Detta ingår:

• 1 st multiladdare E4Q Quad 4x50W

Se rabatterade tillbehör ovan för nätaggregat, laddkablar etc.

Quattro is Efficiency and Economical
Having to recharge your LiPo batteries individually in order to power your drone can be such a tedious approach because you might have to wait for many hours before they are all full.

With E4Q, 4 different cells batteries (2-4S) at the same time by the four independent ports.

Charging through Balance Port
Save you time of plugging the other cable - charging is balancing!

Powered by the most Popular XT 60 Connector
Powered by the original high-temp Nylon XT60, manufactured by AMASS, which can handle over 60A current for extended periods without exceeding 80DegC thanks to their gold-plated spring pins’ better contact surface area.

The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs.

Wide voltage range of 11v through 26.1v gives RC hobbyists more flexibility.

Buttons And Port
The e4Q multi-function charger uses four completely independent but identical circuits with a power output of 50W per power. It is designed for charging 2-4 LiPo batteries. Insert the battery into the right connector of each port, charge The appliance will also charge 4 battery times. The charging current can be adjusted by pressing the button 2A / 3A / 5A The charging capacity can show the charging current in the LED indicator through the color change.

SkyRC E4Q DC Charger:

• DC Input: 11-26.1V
• Low Voltage Alert: ≤10.9V
• High Voltage Alert: ≥26.5V
• Max. Power: 200W (4x50W)
• Battery Type: LiPo, 2S/3S/4S
• Charge Current: 2A/3A/5A (Selectable)
• Balance Current: Max. 400mA/Cell
• Size: 128 x 128 x 50.5 mm
• Net Weight：280 g